넷백업 후 C:\ Hidden 파일중에 _vxfiVspCacheFile_#.VSP 이러한
파일이 생성되는 경우가 있습니다.
(파일크기가 0으로 보여도, 실제 HDD 공간을 차지하는 경우가 있습니다.)
탐색기에서 파일삭제를 하려고 해도, 공유위반으로 삭제가 되지 않습니다.
그럴경우, 아래 방법으로 삭제하시기 바랍니다.
첨부 : Process Explorer
Document ID: 270127
http://support.veritas.com/docs/270127
E-Mail this document to a colleague
http://support.veritas.com/docs/270127
E-Mail this document to a colleague
DOCUMENTATION: When using Veritas Snapshot Provider to perform backups of open files, the creation of temporary files (i.e. vxfiVspCacheFile_0.tmp) for this function may still exist after the backup has completed.
Details:
Note: This utility is not supported by Symantec, but is offered as an alternative to rebooting the Windows client to remove the file handles locking the temporary cache file.
Download and install the utility program in accordance with the manufacturer's recommendations.
If the software requires a license, one must be obtained. Symantec does not provide such a license.
Once installed, launch Process Explorer and follow the procedure listed below:
1. Expand System Idle Process (Figure 1)
2. Select and highlight System (Figure 1); the bottom half of the screen will become populated with a list of all the processes that are running under the System account.
Figure 1
3. Sort the Name field by name and scroll down to the entries that start with \Device\VSPSnapshot0\_vxfiVspCacheFile_1.tmp.
Note: Depending on the number of disk drives on the system, there could be more then one mapping in the list that uses the same naming convention (Figure 2).
4. Highlight the first \Device\VSPSnapshot0\_vxfiVspCacheFile_1.tmp
5. Right-click and select Close Handle
Figure 2
6. Next, highlight the associated system handle that physically shows the drive letter association.
Please note, in step 3 the file \Device\VSPSnapshot0 was selected and normally this will map to the first volume in the backup selection C:\_vxfiVspCacheFile_1.tmp.
Figure 3
Note: Once a handle has been closed, the system may become unresponsive for a short period of time. This most likely is due to the temporary cache being released back to the system.
7. Once the Close Handle option is selected from the dropdown menu, delete the associated TMP file which will exist at the root of the drive in question (in this example, the C:\ drive).
Manual:
Veritas NetBackup (tm) 4.5, 5.0, 5.1 Troubleshooting Guide for Windows
Modification Type: Addition
Modification:
One method to remove the Veritas Snapshot Provider (VSP) temporary cache file is by using a third-party application called Process Explorer that closes the handles attached to the VSP temporary file. This utility can be downloaded from http://www.sysinternals.com/
Note: This utility is not supported by Symantec, but is offered as an alternative to rebooting the Windows client to remove the file handles locking the temporary cache file.
Download and install the utility program in accordance with the manufacturer's recommendations.
If the software requires a license, one must be obtained. Symantec does not provide such a license.
Once installed, launch Process Explorer and follow the procedure listed below:
1. Expand System Idle Process (Figure 1)
2. Select and highlight System (Figure 1); the bottom half of the screen will become populated with a list of all the processes that are running under the System account.
Figure 1
3. Sort the Name field by name and scroll down to the entries that start with \Device\VSPSnapshot0\_vxfiVspCacheFile_1.tmp.
Note: Depending on the number of disk drives on the system, there could be more then one mapping in the list that uses the same naming convention (Figure 2).
4. Highlight the first \Device\VSPSnapshot0\_vxfiVspCacheFile_1.tmp
5. Right-click and select Close Handle
Figure 2
6. Next, highlight the associated system handle that physically shows the drive letter association.
Please note, in step 3 the file \Device\VSPSnapshot0 was selected and normally this will map to the first volume in the backup selection C:\_vxfiVspCacheFile_1.tmp.
Figure 3
Note: Once a handle has been closed, the system may become unresponsive for a short period of time. This most likely is due to the temporary cache being released back to the system.
7. Once the Close Handle option is selected from the dropdown menu, delete the associated TMP file which will exist at the root of the drive in question (in this example, the C:\ drive).
o.VSP 파일이 생성되지 않기를 원하신다면 아래와 같은 명령으로 VSP 사용을 disable 시킬 수 있습니다.
# 마스터 서버에서 MEDIA 서버의 클라이언트의 VSP 를 disable 시킬 때
# 마스터 서버에서 MEDIA 서버의 클라이언트의 VSP 를 disable 시킬 때
MASTER Server > bpclient -client Media Server -add -WOFB_enabled 0
# 확인 방법
MASTER Server > bpclient -client Media Server -L
Client Name: client_name
Current Host:
Hostname: client_name
IP Address: 0.0.0.0
Dynamic Address: no
Free Browse: Allow
List Restore: Not Specified
Max Jobs This Client: Not Specified
WOFB Enabled: NO <-- NO 인지 확인
WOFB FIM: VSP
WOFB Usage: Individual Drive Snapshot
WOFB Error Control: Abort on Error
Connect options: 2 2 3
단, VSP 를 disable 하면 백업 도중에 열려있는 open file 은 백업하지 않고 skip 하여
백업이 1번으로 종료될 수 있습니다.
'Netbackup' 카테고리의 다른 글
| tcp/wrapper 설치된 서버에서 넷백업 안될때 (0) | 2010.02.05 |
|---|---|
| [매뉴얼] MS Exchange 서버 백업을 위한 Veritas Netbackup 5.1 관리자 설명서 (0) | 2008.04.07 |
| [매뉴얼] Veritas Netbackup 버전별 매뉴얼 링크 (0) | 2008.04.07 |
| [복구] 넷백업(Netbackup) NDMP 백업 받은 내용을 복구할 때 주의점. (0) | 2008.04.02 |
